Promo 🎉 Styling Kit Unit Garage Kit Bmw Kit R115 G/s Adv – 11535 😍

All original parts can be reassembled without modification.
The kit includes a set of accessories ready to be mounted, reversible and intercambiable to customize and personalize your GS as you like, even with a few tweaks, eliminating weight and without having to tamper with anything of the original parts.
From combinations with the stickers for the tank, and then turn the GS in enduro version more radical, in an essential Scrambler, Basic or Classic with a color touch Racing.

You can eliminate the bill by moving the radiator in front of the engine, eliminating the instrumentation with a small round tool; leave the original instruments or even without. It also allows the mounting of the upper fender. Streamline the tail by removing the large plate holder to mount a small lower lagging.

At any time you will be able to restore your bike in the original configuration. Everything comes painted with everything needed for installation.
Equipped with TKC tires, you will not find obstacles even off road.
Kit components:

TANK DECALS (1501) protected Couple stickers with special UV-resistant film; being pre-spaced are also applicable in part, for example only the written GS to obtain a more Basic look or eliminating the top as in ADV model. Compatible with models: R850GS-R1150GS and R1100GS-R1150ADV

PROTECTION STICKER (1511)
Couple stickers. Are applied on the knees rubbing the area can strip the paint off-road use and give a more aggressive appearance to the tank. Compatible with models: R850GS-R1150GS and R1100GS-R1150ADV.
BAND TANK IN LEATHER (1509)
range made reservoir in top grain leather and stitched with nylon thread. Handmade in Italy. Gives the vintage-style tank. All necessary parts for assembly are provided. Compatible with models: R850GS-R1150GS and R1100GS-R1150ADV
HOLDER DOWN (1515)
Made of black steel pipe with epoxy powders complete with door aluminum plate with media arrows (not included.) Mount a minimal round headlight with chrome ring (including lamps). The extension of the wiring for the lighthouse and arrows is included. It is fixed in place of the flap and can significantly change the font and style of the bike in the back. number plate size: 185 x 185 mm Compatible with models: R850GS-R1100GS-R1150GS-R1150ADV
EXHAUST SYSTEM (1516)
approved Muffler handmade in stainless steel welds TIG, improves engine response, with no changes to maps or the use of additional units. Easy to install, with removable dB-Killer, full of springs is provided, mounting bracket to the frame, fitting and screws. The sound is fantastic and saving considerable weight: 1,850 kg less than the original pot. Disassembly of the rear wheel after a puncture is performed without removing the muffler. The bottom is equipped with heat protective protection. Fantastic is to be mounted on the bike in the original configuration is on your special. Compatible with original cases and with models: R1150GS and R1150ADV
GRID PROTECTION MUFFLER (1402)
Made in steel rod with high resistance to paint. It protects the legs of the passenger, and the muffler in case of a fall, and completes the look of your bike. It only fits our muffler Cod.
1516. FORK BELLOWS (1522)
Bellows fork in high quality rubber, protect the stems in off-road driving, highly recommended especially if you want to mount the round headlight in the two versions.
WINDSHIELD FENOUIL MATT BLACK (1227MB)
resumes the R80 GS PD mythical look adapted and revised for our kit. Very light, with Matt Black finish. It has a good wind protection and comes complete with mounting brackets.
HANDLEBAR RISER (1504)
Made to CNC machined from solid in fine matt black anodized finish aluminum alloy .
FRAME HEADLIGHT PRO (1216)
Made of treated steel with high resistance to paint. It mounts easily on Riser Cod. 1504 and allows the housing of the headlight, the high fender of the original ones and the smaller domes optional. It is designed for installation of the instrument panel with tachometer tachograph and original.
H11 equipped with two lamps (supplied in kit). The optical unit is the model R1200 R, then high yield when driving at night. The headlamp housing is instead of our production. Can be adjusted and is provided with wiring (1206)
KIT FOR ORIGINAL EQUIPMENT (1508) Delete
the splendid original instruments in this configuration would be a shame, therefore we prepared a kit that allows you to remount speedometer, tachometer and group spies for them. (NB the optional display for the driver information goes eliminated.)
KIT RADIATOR LOW GS 1150 GS 1150 ADV (1506)
Moves of the original radiator from the front to front engine. Consists of everything needed, rubber hoses, fittings, clamps and new radiator brackets.
NB: enter in order notes the chassis number el ‘year of your bike.
FRONT WING MATT BLACK (1209 MB)
Front fender black high matt.
The kit does not iclude;
TKC80 tires
The Aluminum ADV cases (panniers).